Flawed Bear Screen Print Heat Transfer

Flawed Bear Screen Print  Heat Transfer for pressing on cotton garments. Each Transfer contains:

1 Flawed Bear 11.7x11.7 inches  Transfer that can pressed on 100 % cotton or blended garments.

1 instruction card for pressing transfers:

How to Press Tees Using SUPA COLOR Transfers
 
1.  use only 100% Cotton or blends
2. Set Temperature and Time on Heat press:
• 320F (160C)
• 12-15 seconds
3. Set Pressure
Manual Press: Tighten dial until the press won’t close. Loosen dial progressively until the press closes.
4. Pre-Press the shirt for 5-8 Seconds
5. Place the transfer on the shirt. Lay a Teflon sheet or parchment paper over the transfer.
6. Press 12-15 Seconds
7. Hot Peel Immediately from a corner in one smooth motion. Hold down tee with your free hand for better control.
8. post-Press the shirt for 2-4 Seconds. Use a Teflon sheet or parchment to seal the edges of the transfer

PLEASE NOTE THIS SCREEN PRINT TRANSFER IS ONLY FOR  FACTORY GRADE HEAT PRESS USE.